GPS TRACKED DUAL MAKITA CHARGER
£210.00
- 610mm x 230mm x 210mm
- Works Straight out of the Box
- £4.99 + VAT per Month Direct Debit (Data Plan)
- Genuine Makita Dual Charger
- Charges the Tracker when being used as a Dual Charger
- FREE NEXT DAY DELIVERY (MON TO SAT)
Please Note:
This product requires you to setup a monthly direct debit subscription. You will be redirected to our unlimited tracking data plan to setup your direct debit after you have purchased your tracker.
The Dual Makita Charger GPS Tracker is one of the most popular GPS Asset Tracking Devices. It functions as a normal Dual Makita Charger while Tracking every moment of its location. The Dual Makita Tool Tracker will track every 30 seconds or more if needed. The unit will charge the GPS Tracking Circuit while being used as a charger via the UK 3 Pin Plug as normal.
✓ Genuine MAKITA DUAL CHARGER
✓ 610x230x210mm
✓ FREE APP for smart phones
✓ FREE Next day Delivery (Monday to Friday (order before 12pm))
✓ No Contract
✓ £4.99+ VAT per month DIRECT DEBIT (unlimited Tracking) SPECIAL OFFER
✓ Zone and Motion Alerts direct to you phone via Push Alerts or E mail
✓ Low Battery Alerts
✓ Protecting the tools you have using GPS Tracking
✓ 610mmx230mmx210mm
✓ 2G and 3G Tracking
✓ Multi-Mode approach to Tracking
✓ Multi Network Data Use
✓ Roams outside of the UK at no cost
✓ WIFI TRACKING SUPPORT FROM ITRACKDIRECT
Normal Tracking Mode
This is the most frequent mode that most people use. Whist the PCB is moving it will track at the interval you requested.
i.e Normal Tracking Mode 30 seconds. At all times, the PCB is on in this mode, when it stops moving for 60 seconds, it will turn off GPS and disconnect the data connection, keeping the functionality of SMS so you can still send commands. By automatically switching off GPS and data connection while stationary, the battery life is greatly improved. While in this static mode, the device will wake up every 4 hours, get a GPS fix and send this information with battery level back to the server. This gives assurance that the device is still working and shows its last location.
You can change the tracking interval and send any type of command to the PCB whilst it is in this mode. The GPS will only try to get a fix when in motion, or when request is sent via the APP or panel. Compared to other modes, Normal Tracking Mode reduces the battery life, but the PCB has very low power consumption quality components, so depending on your choice of battery, this mode can be enjoyed for several months.